Your Teltonika hardware, installed and configured by us. Official Teltonika distributor · appointment in 24-72 hours · 12-month installation warranty · network of installers across mainland Spain.
Trackiber's professional GPS installation service covers the physical installation and configuration of Teltonika GPS devices in vehicles, at our own workshop in Madrid or through our network of installers across mainland Spain. Price from €80 per vehicle, with a 12-month installation warranty.
Why pay for installation
An unconfigured Teltonika tracker won't report to your platform. Even if the unit powers on, you still have to enter the carrier's APN, your tracking platform's server and the reporting parameters. On hardwired models you also have to connect to permanent positive, ignition and ground, and integrate the vehicle's CAN bus. This is where most DIY installations fall apart.
- Correct configuration from day 1: APN, your platform's server, reporting parameters and events. No going back to the workshop a week later because the data isn't coming in.
- Functional tests before we hand the vehicle back: GPS signal, cellular connectivity and first event confirmed on your server. On hardwired jobs, CAN parameters are also verified on the road.
- 12-month installation warranty: if something fails because of the installation (loose cable, poor power tap, bad configuration), we fix it at no cost. This is separate from the 24-month warranty on the Teltonika unit itself.
- Zero technical learning curve: you buy, you run your fleet, you get the data. The wiring and the initial FOTA are handled by someone who has installed these units thousands of times.
Two services depending on your hardware
GPS installation without wiring · €80
For devices that plug into the vehicle's OBD port, magnetic trackers for trailers and unpowered assets, and units with a self-contained internal battery. Average time in the workshop: 30-45 minutes per unit.
Includes: device configuration (APN, server, parameters), functional tests in the workshop, 12-month installation warranty.
Buy installation without wiring →
Hardwired GPS installation · €150
For hardwired trackers in the FMB/FMC series (FMC920, FMC130, FMC150, FMC125, FMC650, FMC234), units with a native CAN bus or external adapter (ALL-CAN, LV-CAN200, CAN-CONTROL) and ADAS, DSM or dashcam cameras. Average time in the workshop: 1.5 to 3 hours per unit.
Includes: hardwired installation (positive, ignition, ground), CAN bus integration (J1939/FMS on trucks, CAN-OBD on cars and vans), advanced configuration (I/O profiles, events, initial FOTA), road test, 12-month installation warranty.
Teltonika hardware we install
The service covers the entire Teltonika catalogue we sell. The models we install the most:
- FMC920 — compact 4G tracker, the most in-demand in fleets (hardwired installation).
- FMC150 — native CAN bus reading (J1939/FMS), trucks and industrial vehicles (hardwired installation).
- TAT240 — magnetic asset tracker with internal battery for trailers and machinery (installation without wiring).
- ADAS camera — collision prevention with calibration included (hardwired installation).
- FMC003 OBD — plug & play in the OBD port for renting and light vehicles (installation without wiring).
If your model isn't listed, we install it too: we cover the entire Teltonika catalogue we sell (FMB, FMC, FMM, TAT, FTC, GH, TFT series and cameras).
How it works
- You buy the device + the installation from each product page: tick the "Add professional installation" checkbox on the hardware listing, or buy the service separately if you already have the unit.
- We call you within 24-72 hours to arrange an appointment. The specific installation day depends on the availability of the nearest workshop.
- You bring the vehicle to the workshop, either our own or a network partner in your area. For fleets of 5 or more units, we send a technician to your base.
- We hand it back working: device wired/fitted, configured for your platform, with the first event confirmed on your server and, on hardwired jobs, CAN parameters verified on a short road test.
Where we install
Our own workshop in Madrid + a network of installers across mainland Spain. We cover the main cities; if your area isn't on a scheduled route, get in touch before buying and we'll confirm coverage. For fleets of 5 or more units, we send a technician to your base — write to info@trackiber.com with your tax ID, the device model and the number of vehicles so we can prepare a quote.
Madrid and metropolitan area
Our own workshop. Installation any weekday subject to availability. Covering the whole Community of Madrid (Alcobendas, Getafe, Móstoles, Fuenlabrada, Leganés, Alcalá de Henares).
Barcelona and Catalonia
Network of installers in Barcelona city, Hospitalet, Sabadell, Terrassa, Badalona. Tarragona and Girona by coordinated appointment.
Valencia and the Valencian Community
Coverage in Valencia city, Alicante, Castellón, Elche. Ideal for east-coast fleets and industrial areas.
Andalusia
Seville and Málaga with an active network. Córdoba, Granada, Almería, Huelva, Jaén and Cádiz by coordinated appointment depending on volume.
North: Basque Country, Cantabria, Asturias
Bilbao, Santander and Oviedo covered. For San Sebastián, Vitoria and the rest of the north, confirm with us before buying for appointment lead time.
Aragon, Navarre, La Rioja
Zaragoza with an active network. Pamplona and Logroño by coordinated appointment.
Galicia
A Coruña, Vigo and Santiago with an active network. Lugo and Ourense with a call-out.
Castile and León, Castile-La Mancha, Extremadura
Valladolid, Salamanca, Toledo, Albacete, Cáceres and Badajoz by coordinated appointment. In rural areas or smaller provincial capitals the lead time may extend by 1-2 extra days.
Murcia, Balearic Islands
Murcia city and Cartagena covered. Palma de Mallorca with an occasional call-out (check lead time and possible extra island logistics cost).
Canary Islands
Specific logistics: we install in Gran Canaria and Tenerife with prior coordination. Las Palmas and Santa Cruz have differentiated lead time and shipping cost; ask us before buying if your fleet is in the Canary Islands.
Your city not listed? We cover all of mainland Spain and the Balearic Islands with a scheduled network. If your area isn't on a regular route, write to info@trackiber.com with your postcode and device model to confirm appointment lead time before buying.
Why with us
- Official Teltonika distributor in Spain: real stock in our ES warehouse, RMA handled by us (we don't send you off to Lithuania) and Teltonika hardware installed in thousands of vehicles across Spanish fleets.
- Teltonika hardware specialists: we've spent years installing and configuring these units. Not a generic workshop learning on your vehicle.
- Technical support in Spanish via WhatsApp and email: you get someone who installs these units every day. Monday to Friday, 9am-6pm CET. Not an outsourced call centre.
Installation warranty
If, within 12 months of the installation, something fails because of the installation (loose cable, poor power tap, incorrect configuration, badly stuck mount), we fix it at no cost to you: new workshop appointment, inspection and repair included.
The warranty on the Teltonika unit is separate and lasts 24 months from purchase: if the device fails due to a factory defect, we handle the RMA directly with Teltonika ourselves.
Frequently asked questions
Can I install the device myself?
Yes, technically you can. OBD units plug into the port and magnetic ones stick to the chassis without any hassle. The part that fails in self-installs is usually the configuration (correct carrier APN, your platform's server properly set up, reporting parameters tuned to your use) and, on hardwired jobs, the CAN bus tests. Our service covers all of that with a warranty.
What if I have 10 vehicles? Do I have to take them one by one to the workshop?
No. For fleets of 5 or more units we send a technician to your base. Write to info@trackiber.com with your tax ID, the device model and the number of vehicles and we'll prepare a fleet installation quote (volume discount off the per-unit rate).
What happens if the device stops working after installation?
First we diagnose whether the problem is with the unit (covered by Teltonika's 24-month warranty, RMA handled by us) or with the installation (covered by our 12-month installation warranty). You don't have to figure it out: call us, we'll take a look.
Which provinces does the installer network cover?
Our own workshop in Madrid. A scheduled network with coverage in the main cities of mainland Spain. Before buying, if your area isn't on a regular route, confirm it with us so there are no surprises with the appointment lead time.
How soon do you install?
Appointment within 24-72 hours of purchase. The specific installation day depends on the availability of the nearest workshop (typically the same week in Madrid). Time in the workshop: 30-45 min for no-wiring, 1.5-3 h for hardwired/CAN/camera.
Does camera installation include calibration?
Yes. For front ADAS cameras and driver DSM cameras, angle calibration and alignment are included in the hardwired service. Without correct calibration, the camera's alerts are useless.
Do you do the installation service only if I buy the hardware elsewhere?
Yes, you can book the installation without buying the device from us. That said: if the unit fails, the RMA will have to be handled by the seller you bought it from (we can't process a Teltonika hardware warranty on units we didn't sell). The installation warranty (12 months) we honour either way.
Does your device also need a SIM to report? See M2M SIM 500 MB multi-carrier →
Ready? Go back to the device page you're going to buy and tick "Add professional installation" in the checkbox, or buy the service directly: without wiring (€80) · hardwired (€150).